Model 3419

Automotive Load Cells from Lebow Products Inc.

The Lebow Seat Belt Sensor features improved accuracy. Calibration is essentially independent of belt thickness, which may change under load. It’s so simple to install. Just remove the pin, lay the belt on the transducer and replace the pin.

It provides excellent repeatability without the need for the extensive belt wrap required on previous models.

- Small size
- Installs without “threading”
- Low sensitivity to belt thickness change
- 3500 lb.

3419


 

Model 3663

Automotive Load Cells from Lebow Products Inc.

The Lebow Pedal Pressure Sensor mounts directly to the brake pedal with its own mounting clamp. Load applied up to 1/2 inch off center, produces less than a 0.5% error. Standard capacity is 300 lbs. This load cell, which is used for brake pedal force measurements by the automotive industry, finds many production applications. It adapts to any of the pedal or bar operated devices used in all production facilities.

- Low off center loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.

3663


 

Model 3663-111

Automotive Load Cells from Lebow Products Inc.

The Lebow Pedal Pressure Sensor mounts directly to the brake pedal with its own mounting clamp. Load applied up to 1/2 inch off center, produces less than a 0.5% error. Standard capacity is 300 lbs. This load cell, which is used for brake pedal force measurements by the automotive industry, finds many production applications. It adapts to any of the pedal or bar operated devices used in all production facilities.

- Low off center loading error
- Easy mounting
- Rugged load surface
- 50, 100, 200, 300 lb.

3663-111