Model 6214-111

Load Cell Overload Protector Lebow Model 6214-111

The Lebow Load Cell Overload Protector is available in sizes that will accommodate load cells with capacities up to 3,000 lbs. and overloads to 15,000 lbs. in tension and 20,000 lbs. compression.

The Lebow Load Cell Overload Protector is available with an optional end plate assembly and rod ends. The Overload Protector eliminates downtime and replacement costs due to damaged strain gage load cells. The unit does not appreciably affect the cell’s dynamic response. Up to its set point (usually 110%), the application of load results in linear deflection of the system. At 110% of rated load, the patented non-linear spring supporting the cell abruptly collapses, shunting the load in excess of 110% to the built-in mechanical stops.

When the load is removed, the springs automatically return to their original position. The low spring rate, above rated load, allows wide tolerances in mechanical stop settings.

100, 200, 300 lb.

6214-111


 

Model 6214-112

Load Cell Overload Protector Lebow Model 6214-112

(See description above)

500, 1K, 2K, 3K lb.

6214-112


 

Model 6214-121

Load Cell Overload Protector Lebow Model 6214-121

(See description above)

100, 200, 300 lb.

6214-121


 

Model 6214-122

Load Cell Overload Protector Lebow Model 6214-122

(See description above)

500, 1K, 2K, 3K lb.

6214-122


 

Model 6214-131

Load Cell Overload Protector Lebow Model 6214-131

(See description above)

500, 1K, 2K, 3K lb.

6214-131


 

Model 6214-132

Load Cell Overload Protector Lebow Model 6214-132

(See description above)

500, 1K, 2K, 3K lb.

6214-132